Tugas Akir

Permanent URI for this communityhttps://repository.polibatam.ac.id/handle/123456789/16

Browse

Search Results

Now showing 1 - 10 of 31

Aplikasi Penentuan Fitur dan Sentimen dengan Metode Thesaurus Dictionaries untuk Menilai Produk Smartphone Terbaru
(Politeknik Negeri Batam, 2017-03-23) Silitonga, Riyan Welky; Widyastuti, Hilda
Determination Application Features And Sentiment With Dictionaries Thesaurus Method To Assess Recent Smartphone Product Case Study: FansPage Facebook Determination of the features and the sentiment is the process of getting the smartphone features of various brands, the most widely discussed by many people, To get you information about those features. Data retrieval is done in a way online through facebook fanspage particular smartphone product, taking the comments contained in the smartphone product status. With the Application Determination Features And sentiment with Method Thesaurus Dictionaries To Assess Products Smartphone Latest, this application is expected later be used by people who want to find new smartphone, that can easily figure out the smartphone features offered by the various kind of smartphone manufacturers.
Perbaikan Motor Pompa Air Satu Phasa
(Politeknik Negeri Batam, 2017-10-18) Manurung, Alpin; Juwito, Arif F.
Over time, many created a tool that can facilitate us in performing daily activities, one of which is the engine water pump. With the engine water pump we no longer trouble to move water from one place to another. If the engine water pump used in a long period of time and sustained, would cause an increase in temperature in the motor water pump, this will cause damage to the pump motor water as the temperature of the motor is too hot, round motor that weakened and dead total. To fix this damage needs to take action to check the motor water pump such as checking the round motor supply voltage, with checking the value of resistance of the main coil on prisoners and detainees, check out their auxiliary coil values custody insulation between the primary and the auxiliary coil coil, and check between the body and the primary coil is fused or not. After doing some checking on the motor pump water then the next step is to do the repairs one way rewinding (TCR) copper wires on motor water pump. But after doing the process of rewinding, the prisoners and the speed of the motor will not be the same as the factory-made because the process of rewinding is done by manual.
Modul Praktikum GLB dan GLBB Berbasis Labview
(Politeknik Negeri Batam, 2017-12-12) Sirait, Irwanto; Prayoga, Senanjung; Arifin, Muhammad
Automation technology is technologies where everyone can do something without having to act directly. With the convenience offered, the human need for automation will always increase. One example is sience practical module there GLB (uniform linear motion) and GLBB (accelerated linear motion) based labview, Operation practical module GLB and GLBB manually is not optimal on operation. Practical module GLB and GLBB based labview is deemed able to solve these problems. Simply by pressing the push button on the panel, then we can operate the module after that read grafic with labview application.
Penyearah Terkendali Setengah Gelombang Tiga Phase
(Politeknik Negeri Batam, 2016-12-28) Muslimin; Juwito, Arif F.
In the era of modern globalization today science and technology is growing rapidly, one of science in the field of power electronics. Many household electronic appliances that use AC current (alternating current) with a large power, but have been controlled by using a microcontroller supplied with DC current (Direct Current) such as fans, was hing machines, lights, air conditioning, other. It is very rare students who do not know the science in the field of power electronics. One example is the application of a three phase phase controlled rectifier. Therefore become the guide of writing trainer as instructional media that serves to control and menyretahkan voltage source PLN 220VAC three phase become DC half wave using SCR as trigger current. This control uses the PWM (pulse width modulation) method with a microcontroller as a pulse width regulator to generate the current supplied to the SCR driver, LED- Phototriac type optocoupler as the driver of the SCR gate, and the LED- phototransistor type optocoupler as the zero crossing circuit On a single wave cycle of a 220VAC voltage source. In the end students can use. Which is directly examined by the author.
Pengendalian Robot Mobil Menggunakan Leap Motion
(Politeknik Negeri Batam, 2017-12-01) Rhomadony, Ilham; Daniel
The development of robotic control technology from human- controlled robot movement from close range, can be controlled from long distance using joystick or remote control which is less effective so that conducted a research of controlling robot easier, by using hand gesture so controlling robot become more natural, the purpose of this research is to produce a system of controlling the Mobile Robot using Leap Motion. The research method is used to use one of the sensors in Leap Motion which is processed using C# programming language that produces a character which is sent to the Mobile Robot using wireless, so the Mobile Robot will move based on the character that received by the Mobile Robot. The results to be gained from this research are the control of Mobile Robot in accordance with the human hand movement. From this research can be concluded that Leap Motion can control the Mobile Robot more easily with the human hand movement.
Pengontrol Suhu pada Mesin Pengering Ikan Teri
(Politeknik Negeri Batam, 2016-12-29) Romansah, Feri; Wivanius, Nadhrah; Ridwan, Ridwan
In the process of drying out the traditional anchovy should be stocked in top spot drying out so that anchovies can be dried evenly. This is done manually promised that is stocked with hands directly so that this process can degrade the quality of anchovy, as being less higenis. In this way requires a long time and the area is quite extensive as well as quality fish can be exposed to dust or declined because the animals stick to and takes a lot of labor. Then over the growing age of the harsher tools dryer anchovy. One goal of this tool is more efficient and doesn't take long. This tool uses the heater, with the source of heat energy that comes from the electric heating element. With added timer and temperature and humidity sensors that function to find out how long does in need temperature and humidity to dry in a dryer anchovy anchovy. This research has resulted in anchovy dryers that can assist in addressing problems with the weather and also labor, because this tool can run or operated in accordance with the concepts and functions that have been designed.
Mengecek Kondisi Baterai PLC Nais Menggunakan Arduino
(Politeknik Negeri Batam, 2017-12-12) Sakinah, Suci Yuli; Sani, Abdullah
To minimize the risk of data loss on PLC (Programmable Logic Controller) memory rapidly when voltage of back-up battery has been depleted, especially those still using external back-up battery. Then someone created a system to monitor battery condition by using Arduino and XBee. This research is a developed of Multipoint system that exist in XBee, by using two XBee as a transmitter and one XBee as a receiver. In order that the XBee able to receive information from the Arduino, need to install ADC (Analog to Digital) Converter to Arduino. The results of the delivery data from the Arduino to XBee will be show in graphs by use LabVIEW program.
Sistem Penguncian Pintu Otomatis Menggunakan Aplikasi Android
(Politeknik Negeri Batam, 2017-02-10) Riady, Hari Tubagus; Sakinah, Nur
In each building certainly has a door that is used. In addition to these doors is a top security measures. Therefore, safeguards on a door must be maximized. This research aims to improve the security of a door being more maximum, so there are no vain people without permission to enter the door. There are several ways to maximize the security of the door, one of them namely the magnetic system. A magnetic system are attached to an electric current with a voltage of 220 volts with the help of the application on the door and it will not be accessible to people who are not interested.
Rancang Bangun Pembangkit Listrik Tenaga Sampah Organik Bagian Pembangkit di Politeknik Negeri Batam
(Politeknik Negeri Batam, 2016-12-26) Mukti, Dimas Perdana; Juwito, Arif F.; Dzuhri, M
Garbage is still a big problem in the lives of people in the world, especially in our country Indonesia. In line with the developments in the various sectors of both industrial and non-industrial into one of the effects of waste production that day keharinya more in line with the demand for energy is increasing, while energy resources become more limited, mainly from burning fossil fuels that have been the mainstay , Therefore, we need another energy source that is capable of being an alternative to overcome the energy crisis which is increasingly becoming. One of the alternative energy source that is being developed is biogas. The goal is to get the source of renewable electrical energy using biogas from waste deposition results - fruit waste to turn the biogas generator. To get an electric voltage and electric current good of biogas generator from the output in the biogas digester. Reduce some of the problems - problems caused by trash - garbage by turning it into useful electrical energy source. The method used is by depositing the fruit waste through anaerobic process. Fruit waste that has been deposited through an anaerobic process can produce methane gas is used as fuel to turn turbines biogas generator that produces electricity.
Sekolah Paket C Berbasis Web
(Politeknik Negeri Batam, 2013-07-23) Setiawan, Andi; Utama, Affandi; Riwinoto
Packet C (Paket C), is a school that the government mode to give an opportunities to students whit several reason, such as students who could not recive their formal high school education, but want to get a high school diploma. The teaching and learning process in this Packet C,students will come to certain school to get some subject matter. We created a system that will make the learning process of teaching an learning in the program paket C easier, namely the information system Paket C. Information system are a computer application used to support the operations of an organization. Paket C Information systems is a system designed to generate and obtain information to support the development of education in Indonesia, particulary in paket C Program. In this system, students will get many easiness in their learning process, because they didn’t have to come to school to get their subject matter and to do their assignments. The students will have to log in first to download and upload the subject matter and also their assaignments given by teachers online. So with this system in the learning process Packet C program, would be more practical and efficient.

Tugas Akir

Browse

Filters

Settings

Sort By

Results per page

Search Results