Tugas Akhir dan Skripsi

Permanent URI for this communityhttps://repository.polibatam.ac.id/handle/123456789/15

Browse

Has files: YesSubject: search.filters.subject.Engineering Testing and Measurement/Teknik Pengujian dan Pengukuran

Search Results

Now showing 1 - 2 of 2
  • Repository Politeknik Negeri Batam
    Item
    Checker Resistance Socket K-E Berbasis Labview
    (Politeknik Negeri Batam, 2018-01-04) Amin Simanjuntak, Christdeora; Sumantri K; Rudiawan Jamzuri, Eko
    PT.Infineon Technologies Batam is an International Scale Company that produces several IC controller to support Automotive Industry. In its production activities PT.Infineon Technologies Batam certainly has a special department to perform testing to IC’s PT.Infineon Technologies Batam Production. And One’s of the supporting accessories testing activities in PT.Infineon Technologies Batam is K-E Socket. And in the implementation of this K-E Socket usually must be done regularly to reduce the Over Reject that occurred in the Line Production. One of the treatments performed on this K-E Socket is by measuring the resistance of each pin’s K-E Socket. For K-E Sockets that have been repaired or maintained by K-E Socket technicians can be ascertained in good condition the resistance value of each’s K-E Socket pin. For that was designed a prototype to measure the resistance of K-E Socket. Checker K-E Socket Resistance is a Prototype made to measure the resistance value of each’s pin Sense and Force. The result of measuring this resistance value in Ohm units. K-E Socket to be tested measurement resistance is of its K-E Socket 300 Dura. The measuring instrument to be used is RS-232 UT61E Multimeter. And the results of the UT61E RS-232 Multimeter measurement will be displayed inside your PC or Laptop. And the measurement data will be stored in a Microsoft Excel database.
  • Repository Politeknik Negeri Batam
    Item
    Pengontrolan Motor pada Pompa Air Untuk Mengatur Level Air Menggunakan Programmable Logic Control
    (Politeknik Negeri Batam, 2017-12-12) Azis, Zainul; Sugandi, Budi
    The need for clean water is a very vital requirement in everyday life. Along with the development of technology, made a water container in the form of tendons / water tanks are used to anticipate if the water supply died due to water disruption. The problem that arises when the water level in the water container tank is unknown, it is possible that the overflowing or empty reservoir situation can be caused by the lack of control over the tank, so a device that can automatically control the tanks is made. The author uses the way by using the switch regulator and PLC. Swich regulator is used as the motor speed setting based on the output voltage (volt). this control can be done manually or with the help of additional devices such as PLC (Programmable Logic Control). By setting the output voltage, when the motor speed increases, the current is at 0.4A and the voltage is 221V, while the motor speed is reduced, the current is at 0.2A and the voltage is 205V.