Tugas Akhir dan Skripsi

Permanent URI for this communityhttps://repository.polibatam.ac.id/handle/123456789/15

Browse

Search Results

Now showing 1 - 10 of 10

Aplikasi Pemetaan Posisi Buku Pada Perpustakaan Politeknik Negeri Batam
(Politeknik Negeri Batam, 2018-01-17) Fahrizal Ardi Muhammad, Fandy; Sutopo Pamungkas, Daniel; Toar, Handri
The library needs support components that can make it easy to access. This research is aimed to develop library services. The development utilizes android applications, so that students or civitas can access the library from another place. To access the library, users can use a downloaded android app on the phone. By using the application, users can find information about books in the library. In the android application, users can find information from books such as authors, publishers, the number of books available, as well as book positions. This application is expected to improve the quality of the Politeknik Negeri Batam’s library.
Sistem Pemantauan Dan Pengendalian Level Tangki Settling Mfo Pada Pltd Batu Ampar Menggunakan Lab View
(Politeknik Negeri Batam, 2018-01-03) Arianto, Deni; Aisyah, Siti
Nowadays, communication system development had spread rapidly. This condition, made human job easily to monitoring and to control many things especially in industry era. At Batu Ampar diesel power plant, one of the most important parameter for keep fuel systemat settling tank level. Due to manually to fill the fuel to settling tank by operator, it made non effective because the distance between settling tank was so far from control room.Thiscondition can be removed by added ultrasonic sensor to measure the level of MFO fuel. After that, the data from sensor will transfer and process into microcontroller. We alsomade human interface system to display settling tank level by using LabVIEW. Based onresearch and analysis, we can took conclusion that these system will be more efficiently if parameter to monitor settling tank about 5 until 50 m. But it would be unefficient if theparameter to read the settling tank level more than 50 until 80 m because there was delay about 4 seconds. To switched on and off the transfer pump, happened delay along 2 seconds from 5 to 50 m. And for the parameter between 50 until 80 m, it took longer delay about 40 seconds.
Analisis Kapasitas Baterai Lithium Polymer (Li-Po) pada Robot Automated Guided Vehicle (Agv)
(Politeknik Negeri Batam, 2018-01-04) Kristovel R.S Sibarani, Ronny; Soebhakti, Hendrawan
The use of robots in everyday life continues to increase because the robot has many advantages such as Lithium Polymer Battery Capacity Analysis tool on Robot Automated Guided Vehicle (AGV) which is a system of controlling the amount of battery usage in robots such as controlling the battery usage on the robot and battery charging on the sensor and assuming the battery in the charging system. Analysis of the capacity of Lithium Polymer (Li-Po) batteries in Robot Automated Guided Vehicle (AGV) researchers should analyze how to know the capacity of the battery when the robot is active and how to calculate the capacity of the battery against the distance or time of the robot. Lithium Polymer battery capacity analysis should use rechargeable batteries and use a voltage sensor where the voltage sensor serves as a detector of the amount of voltage used and current sensor ACS 712 5A which serves as a current detector and displays in 16x2 lCD which serves to display the value of voltage, current, capacity and battery power. The results of this study are expected to be used for other applications such as line follower robots, robotcopter, and other robot applications
Checker Resistance Socket K-E Berbasis Labview
(Politeknik Negeri Batam, 2018-01-04) Amin Simanjuntak, Christdeora; Sumantri K; Rudiawan Jamzuri, Eko
PT.Infineon Technologies Batam is an International Scale Company that produces several IC controller to support Automotive Industry. In its production activities PT.Infineon Technologies Batam certainly has a special department to perform testing to IC’s PT.Infineon Technologies Batam Production. And One’s of the supporting accessories testing activities in PT.Infineon Technologies Batam is K-E Socket. And in the implementation of this K-E Socket usually must be done regularly to reduce the Over Reject that occurred in the Line Production. One of the treatments performed on this K-E Socket is by measuring the resistance of each pin’s K-E Socket. For K-E Sockets that have been repaired or maintained by K-E Socket technicians can be ascertained in good condition the resistance value of each’s K-E Socket pin. For that was designed a prototype to measure the resistance of K-E Socket. Checker K-E Socket Resistance is a Prototype made to measure the resistance value of each’s pin Sense and Force. The result of measuring this resistance value in Ohm units. K-E Socket to be tested measurement resistance is of its K-E Socket 300 Dura. The measuring instrument to be used is RS-232 UT61E Multimeter. And the results of the UT61E RS-232 Multimeter measurement will be displayed inside your PC or Laptop. And the measurement data will be stored in a Microsoft Excel database.
Sistem Otomasi Loading/Unloading pada Proses Annealing Furnace Berbasis Plc
(Politeknik Negeri Batam, 2018-01-03) Syahputra Lubis, M. Ashari; Gozali, M. Syafei
In the process of handling in annealing furnace, loading and unloading system is a very important activity to help the process of moving the workpiece into annealing process. Thus this work is done repeatedly throughout the work day. Previously loading and unloading jobs are still done entirely by the workers manually, without any mechanical aids, more effective and lower operating costs. But behind those advantages, poorly designed manual work will pose a high risk of working injuries, especially injuries to the lower spine that can be fatal to the worker. Therefore, PLC as a controller helps an activity to be faster and easier. And this PLC is a digital computer device used to automate a machine or manage electro-mechanical processes in an industry. Then the system is auto loading with the help of cylinder and timer make the process of loading have spare time for 18 minutes for operator to do other work and will not standby continue. On the other hand the system of unloading and cooling is auto and assisted by cylinder can also directly to cooling process without taking and putting to cooling rack and can cut cooling time from 60 minutes to 8 minutes. And the auto system in unloading is more effective 86% than before.
Hi-Pot Tester Machine
(Politeknik Negeri Batam, 2018-03-05) Yusuf Yusron, Ahmad; Gozali, M. Syafei
This research aim to create a machine that can test the leakage current and ground body on the coffe machine automatically. The test will be done by sequence diagram methode controlled by plc (Programmabel Logic Controller) with input of a sensor to detect the object and pneumatics of the cylinder also motor as the driver. Testing leakage current is done by connecting a certain voltage to thermoblock coffee machine and testing ground body by measuring the grounding resistance of the coffee machine. The results of this research engine can perform leakage current testing and ground on a coffee maker with a 100% success rate test of 30 products, based of data tested with the same product.
Monitoring Smart Home Via Android
(Politeknik Negeri Batam, 2018-01-18) Kurniawan, Wahyu
Smart home is a system that integrates the electronic devices that are often used in a house with a media control where the media control is a smartphone device. home servers are created using Wi-Fi technology that accepts orders from clients and orders will be processed through Wemos. System design is based on Wemos Microcontroller device and some passive and active sensors. This study aims to design a home control system that allows users to control lighting at home, monitor the temperature and humidity of the room, monitor gas and smoke in the house which is integrated with one android device that applies controlling wirelessly (wifi) using microcontroller Wemos D1. The results showed that the application on Android can replace the function switch and can be a medium to monitor the home directly through the web server.
Sistem Pergerakan Point to Point Mobile Robot dengan Kontrol Posisi Motor DC
(Politeknik Negeri Batam, 2018-07-20) Danil, Jufrika; Soebhakti, Hendrawan; Pratama, Rizky
Mobile robot is typically one of numerous types of robots, as it is the foremost used for Differential Wheel Drive that offers low cost. However, regardless of the type, the main issue from mobile robot is related to it’s drive system and it’s simple manually controlled with on-off controller. Furthermore, the automatic drive is necessitated to move to targeted points or positions with ease. Thus, implementing Forward Kinematics method which is received from time discrete feedback and inverse kinematic controlled by PID with feedback of internal encoder at DC motor is supposed to make robot moves automatically. This experiment shows that the driving control system can move the position of the robot where the average error for its movement/motion is 11.9% with respect to X axis, 11.4% with respect to Y axis, as well as 15.4% towards Theta with percentage of successful movement reaches 87.08%. Additionally. The error may due to slip of the wheels while moving as well as system of position’s feedback and the direction that is only obtained by time discrete.
Streaming Android Terintegrasi dengan Sensor PIR Sebagai Sensor Gerak
(Politeknik Negeri Batam, 2018-06-04) Khoirunnisa, Adila; Sumantri K
Streaming is a continuous process of sending data that allows users to access files that have not been received entirely. Streaming methods can be applied in everyday life to monitor an activity outside the door. Activities can be negative or positive. Based on these problem, author designed activity detection system using PIR sensor to detect the movement of human body, so PIR sensor can be an automatic home bell when people come to visit. After PIR sensor detects, the camera android (client) will be active and send the live event streaming to android (user) so homeowners can easly monitoring directly. Result from this research is video streaming service using TCP protocol has fulfilled the standard of QoS (Quality of Service) TIPHON by using delay parameter in 3.95745ms with very satisfying category, throughput parameter in 327637.144bps with very satisfying category and packet loss parameter in 0.952% with satisfactory category. Based on the research, author hope this tool can help homeowners to monitoring activities outside the door from anywhere.
Analisis Faktor Penyebab Mahasiswa Sp Menggunakan Kombinasi Ahp-Apriori
(Politeknik Negeri Batam, 2018) Hasanah, Uswatun; Rokhayati, Yeni
Students receiving letters and so on are called SP from SP 1 (one), SP 2 (two), and SP 3 (three) which produce phenomena suitable for use by the author. Factors that affect students get the biggest cause SP is social that occurs at the lecture level. The things that happen to the values that go on the percentage of student value itself. SP data is then processed using 2 methods namely AHP and Apriori methods. Through the AHP method that is able to rank SP by causing factors that affect SP, then followed by Apriori method to determine the factors that are related to the data or cases that have been obtained through ranking with the final result is a conclusion which factors are considered to be the greatest influence then resulted in students exposed to SP.

Tugas Akhir dan Skripsi

Browse

Filters

Settings

Sort By

Results per page

Search Results